View LC200WX1-SLB3_2775299.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 20.0 wxga tft lcd title model buyer *when you obtain standard approval, please use the above model name without suffix lc200wx1 *model slb3 suffix lg.philips lcd co., ltd. supplier ) ) ( ( final specification preliminary specification for approval specification tv product development dept. lg. philips lcd co., ltd y.c jang / engineer prepared by h.s song / manager reviewed by j.h lee / senior manager signature date approved by please return 1 copy for your confirmation with your signature and comments. / / / signature date approved by www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 2 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 contents 27 precautions 9 27 mounting precautions 9-1 27 operating precautions 9-2 28 electrostatic discharge control 9-3 28 precautions for strong light exposure 9-4 28 storage 9-5 28 handling precautions for protection film 9-6 14 8 interface connections 3-2 color input data reference 3-5 26 designation of lot mark 8-1 26 packing form 8-2 26 packing 8 25 emc 7-2 1 cover 2 contents 3 record of revisions 4 general description 1 5 absolute maximum ratings 2 6 electrical specifications 3 6 electrical characteristics 3-1 12 signal timing specifications 3-3 13 signal timing waveforms 3-4 15 power sequence 3-6 17 optical specifications 4 21 mechanical characteristics 5 24 reliability 6 25 international standards 7 25 safety 7-1 page item number www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 3 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 record of revisions final specification - aug.9, 2007 1.0 description page revision date revision no. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 4 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 LC200WX1-SLB3 is a color active matrix liquid cryst al display with an integral cold cathode fluorescen t lamp(uccfl) backlight system. the matrix employs a- si thin film transistor as the active element. it is a transmissive type display operating in the n ormally black mode. it has a 20.04 inch diagonally measured active display area with wxga resolution ( 768 vertical by 1366 horizontal pixel array) each pixel is divided into red, green and blue sub- pixels or dots which are arranged in vertical strip es. gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for ea ch dot, thus presenting a palette of more than 16.7m(true) colors. it has been designed to apply the 8-bit 1 port lvds interface. it is intended to support lcd tv, pctv where high b rightness, super wide viewing angle, high color gam ut, high color depth and fast response time are importa nt. general features hard coating(3h), anti-glare treatment of the front polarizer transmissive mode, normally black 2,800 g (typ.), 3,000 g (max) total 49.8watt (typ.) (logic=3.00w, backlight=46.8w ) viewing angle free ( r/l 178(typ.), u/d 178(typ.)) 410 cd/m 2 (center 1 point typ.) 8-bit, 16.7 m colors 1366 horiz. by 768 vert. pixels rgb stripe arrangeme nt 0.108mm x 0.324mm x rgb 472.0mm(h) x 275.0mm(v) x 38.0mm(d) (typ.) 20.04 inches (509.016mm) diagonal viewing angle (cr>10) color depth pixel format luminance, white power consumption weight display operating mode surface treatment pixel pitch outline dimension active screen size cn1 (30pin) lvds 5pair option source driver circuit tft - lcd panel (1366 rgb 768 pixels) g1 s1 s1366 g768 back light assembly (5uccfl) rgb timing controller (lvds rx integrated ) gate driver circuit inverter (cn2,14pin) +24.0v gnd power circuit block 1. general description # 9,28 +12.0v www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 5 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 the followings are maximum values which, if exceede d, may cause faulty operation or damage to the unit . 2. absolute maximum ratings table 1. absolute maximum ratings 1 1 1 2 50 0 top v dc 3.3 0.0 vbr-a brightness control voltage 1 65 0 tsur operating temperature (ambient temp.) v dc 27.0 -0.3 vbl backlight inverter lcm unit %rh 90 10 hop operating ambient humidity %rh 90 10 hst storage humidity 65 -20 tst storage temperature v dc 5.25 -0.30 von/off on/off control voltage at 25 2 c v dc 14.0 -0.3 vlcd power input voltage max min parameter remark value symbol note : 1. temperature and relative humidity range a re shown in the figure below. wet bulb temperature should be 39 c max. and no condensation. 2. abnormal visual problems by panel front side surface temperature can be occurred in specific range (60 c ~ 65 c), but materials(ex : polarizer) are not damaged p ermanently in this range, t sur. 3. ambient illuminancd should be more than 10 lux. figure 2. temperature and relative humidity 90% 10 20 30 40 50 60 70 80 0 -20 0 10 20 30 40 50 dry bulb temperature [c] wet bulb temperature [c] storage operation h u m i d i t y [ ( % ) r h ] 10% 40% 60% 60 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 6 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 it requires two power inputs. one is employed to po wer the lcd electronics and to drive the tft array and liquid crystal. the other input power for the uccfl /backlight is to power inverter. table 2. electrical characteristics note : 1. the specified current and power consumption are under the v lcd =12.0v, 25 2 c, f v =60hz condition whereas mosaic pattern(8 x 6) is displayed and f v is the frame frequency. 2. the current is specified at the maximum current pattern. 3. the duration of rush current is about 2ms and ri sing time of power input is 1ms(min.). mosaic pattern(8 x 6) white : 255gray black : 0gray 3. electrical specifications 3-1. electrical characteristics 1 ma 325 250 - 1 watt 3.90 3.00 - p lcd power consumption 3 a 3.0 - - i rush rush current v dc 12.6 12.0 11.4 v lcd power input voltage 2 ma 442 340 - i lcd power input current module : parameter symbol max typ min note unit value www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 7 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 table 3. inverter electrical characteristics note : 1. the specified current and power consumption are under the typical supply input voltage, 24.0v. the ripple voltage of the power supply input voltag e is under 0.5 vp-p. inrush current of the power supply input current is under +10% of the typical current 2. specified values are for a single lamp which is aligned horizontally. the life is determined as the time at which luminan ce of the lamp is 50% compared to that of initial value at the typical lamp current on condition of c ontinuous operating at 25 2 c. specified value is when lamp is aligned horizontall y. 3. electrical characteristics are determined after the unit has been on and stable for approximately 2hrs in a dark environment at 25 c 2 c. 4. burst mode is controlled by tv system. 5. rush current is determined at turning on after t he unit has been off for 2hrs at 25 c 2 c. 6. synchronize pwm by triple with vsync signal of sy stem. v dc 0.6 - 0.0 low level v dc 5.0 - 2.5 high level pulse duty(pwm) (burst mode) 1, 3 watt 54 46.8 - v br Ca =3.3v p bl power consumption 5 a 3.0 - - v bl =21.6v v br -a=3.3v extv br -b=100% i rush inrush current 6 hz - 180 - v bl =24v extv br -b=pwm f-b frequency (pwm) (burst mode) 4 % 100 - 20 external input (pwm) extv br -b brightness adj (burst mode) 2 hrs 60,000 50,000 lamp life time 1, 3 note max. typ. min. v dc 25.2 24.0 21.6 v bl input voltage v dc 0.6 0.0 lamp off =low v dc 3.3 - 0 v br -a brightness adj (analog mode) v dc 5.0 - 2.4 lamp on = high v on/off b/l on/off control a 2.25 1.95 1.55 v br -a(max) = 3.3v i bl input current unit value condition symbol parameter www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 8 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 table 4. module connector(cn1) pin configuration - lcd connector(cn1) : fi-x30ssl-hf (manufactured by jae) - mating connector : fi-x30c2l (manufactured by jae) note: 1. if the pin no. 9 is ground, interface fo rmat is lg, and if the pin no. 9 is vcc(3.3v), in terface format is dism. see page 9 and 10. 2. the pin no. 30 is necessary for lcd test. when lvds signals are abnormal operation more than 3-vsync times and power 12v is supplied, open or vcc : lcd operate itself some test patte rns.(agp C auto generation pattern) ground : lcd operate itself a black pattern. (nsb C no signal black) lpl recommend ground for nsb. 3. all gnd (ground) pins should be connected togeth er, which should be also connected to the lcd modules metal frame. 4. all v lcd (power input) pins should be connected together. 5. input levels of lvds signals are based on the ie a 664 standard. 6. if the pin no. 28 is open or vcc, pol period i s 1 frame and if the pin is ground, pol period is 2 frame with gamma swing. lvds receiver signal(+) rd+ 25 lvds receiver signal(-) rd- 24 ground gnd 23 lvds receiver clock signal(+) rclk+ 22 lvds receiver clock signal(-) rclk- 21 lvds receiver signal(-) rb- 15 ground gnd 14 lvds receiver signal(+) ra+ 13 lvds receiver signal(-) ra- 12 ground gnd 11 6 select inversion mode select 28 ground gnd 29 2 lcd test nc(gnd) 30 power supply +12.0v vlcd 2 power supply +12.0v vlcd 3 power supply +12.0v vlcd 4 ground gnd 5 ground gnd 6 ground gnd 7 ground gnd 8 1 select lvds data format select 9 nc nc 10 lvds receiver signal(+) rb+ 16 ground gnd 17 lvds receiver signal(-) rc- 18 lvds receiver signal(+) rc+ 19 ground gnd 20 ground gnd 26 nc nc 27 note description symbol pin no. vlcd power supply +12.0v 1 this lcd employs two kinds of interface connection, a 30-pin connector is used for the module electron ics and two 12- pin connectors are used for the integral backlight system. 3-2-1. lcd module 3-2. interface connections www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 9 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 note: 1. the lcd module uses a 100 ohm[ ] resistor between positive and negative lines of e ach receiver input. 2. refer to lvds transmitter data sheet for detail descriptions. (ds90c385 or compatible) 3. 7 means msb and 0 means lsb at r,g,b pixel dat a. red0 red1 red2 red3 red4 red5 red6 red7 green0 green1 green2 green3 green4 green5 green6 green7 blue0 blue1 blue2 blue3 blue4 blue5 blue6 blue7 hsync vsync data enable clock host system 24 bit txout0- txout0+ txout1- txout1+ txout2- txout2+ txclkout- txclkout+ txout3- txout3+ 51 52 54 55 56 3 50 2 4 6 7 11 12 14 8 10 15 19 20 22 23 24 16 18 27 28 30 31 ds90c385 or compatible 12 13 15 16 18 19 21 22 24 25 9 30 rxin0- rxin0+ rxin1- rxin1+ rxin2- rxin2+ rxclkin- rxclkin+ rxin3- rxin3+ lg / dism lcd test 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 48 47 46 45 42 41 40 39 38 37 fi-x30ssl-hf timing controller lcd module table 5. required signal assignment for lvds transmi tter ( pin9=l or open ) gnd gnd www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 10 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 table 6. required signal assignment for lvds transmi tter ( pin9=h ) red0 red1 red2 red3 red4 red5 red6 red7 green0 green1 green2 green3 green4 green5 green6 green7 blue0 blue1 blue2 blue3 blue4 blue5 blue6 blue7 hsync vsync data enable clock host system 24 bit txout0- txout0+ txout1- txout1+ txout2- txout2+ txclkout- txclkout+ txout3- txout3+ ds90c385 or compatible 12 13 15 16 18 19 21 22 24 25 9 30 rxin0- rxin0+ rxin1- rxin1+ rxin2- rxin2+ rxclkin- rxclkin+ rxin3- rxin3+ lg / dism lcd test 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 100 ? ?? ? 48 47 46 45 42 41 40 39 38 37 fi-x30ssl-hf timing controller lcd module vcc gnd 50 2 51 52 54 55 56 3 8 10 4 6 7 11 12 14 16 18 15 19 20 22 23 24 27 28 30 31 note: 1. the lcd module uses a 100 ohm[ ] resistor between positive and negative lines of e ach receiver input. 2. refer to lvds transmitter data sheet for detail descriptions. (ds90c385 or compatible) 3. 7 means msb and 0 means lsb at r,g,b pixel dat a. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 11 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 - inverter connector : s14b-ph-sm3 side entry type ( manufactured by jst) - mating connector : phr-14 or equivalent table 7. inverter connector pin configulation 3-2-2. backlight inverter note : 1. gnd is connected to the lcd modules metal frame . pcb 1 2 3 14 13 12 jst s14b-ph-sm3 (jst : japan solderless terminal co.,ltd.) 1 0v(min) ~ 3.3v(max) analog dimming v br -a 11 on : 2.4 ~ 5.0v off : 0.0 ~ 0.8v backlight on/off control on / off 12 24v power input v bl 1 normal : 0v abnormal : external pull-up rising edge : lamp on falling edge : lamp off 24v power input v bl 3 24v power input v bl 2 error out extv br -b gnd gnd gnd gnd gnd v bl v bl symbol signal assignment backlight status output external pwm signal ground ground ground ground ground 24v power input 24v power input note 7 14 13 10 9 8 6 5 4 pin www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 12 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 table 8. timming table this is the signal timing required at the input of lvds transmitter. all of the interface signal timi ng should be satisfied with the following specifications for it s proper operation. 3-3. signal timing specifications mhz 82 72.3 68 f clk frequency lines 1063 790 775 t vt total clks 1776 1528 1456 t ht total 295 768 66 410 1366 53 14.7 max. 22 768 60 162 1366 47.4 13.8 typ. 7 768 47 90 1366 45 12.2 min. note unit symbol item lines t vt -t vv blank pal : 47~53hz, ntsc : 57~66hz hz f v frequency vsync lines t vv display valid clks clks khz ns t ht- t hv t hv f h t clk blank display valid frequency period hsync clock notes: 1. the performance of the electro-optical character istics are may be influenced by variance of the vertical refresh rates. 2. above timing table is only valid for de mode. 3. h sync, v sync dont care.(for only de mode.) www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 13 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 3-4. signal timing waveforms 0.7vdd 0.3vdd de, data t clk invalid data valid data invalid data de(data enable) 0.5 vcc de(data enable) dclk t ht t hv 1366 t vv t vt 1 768 1 768 1366 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 14 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 the brightness of each primary color(red,green,blue ) is based on the 8-bit gray scale data input for th e color the higher the binary input, the brighter the color . the table below provides a reference for color ve rsus data input. table 9. color data reference 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (000) dark green 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 green (001) ... ... ... ... 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 green (254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green (255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (000) dark red 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 red (001) ... ... ... ... 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 red (254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red (255) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (001) ... ... ... ... 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (254) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (255) blue (000) dark white yellow magenta cyan blue (255) green (255) red (255) black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 basic color 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 blue msb lsb green msb lsb red msb lsb b7 b6 b5 b4 b3 b2 b1 b0 g7 g6 g5 g4 g3 g2 g1 g0 r7 r6 r5 r4 r3 r2 r1 r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue color input color data 3-5. color data reference www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 15 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 note : 1. please avoid floating state of interface s ignal at invalid period. 2. when the interface signal is invalid, be sure to pull down the power supply v lcd to 0v. 3. the case when the t2/t5 exceed maximum specifica tion, it operates protection pattern(black pattern) till valid signal inputted. there is no reliability problem. 4. the t3/t4 is recommended value, the case when fa iled to meet a minimum specification, abnormal display would be shown. there is no reliab ility problem. s - - 2.0 t7 ms - - - t6 ms 50 - 0.01 t2 ms ms - - 200 t3 - - 200 t4 ms 50 - 0.01 t5 ms 20 - 0.01 t1 max typ min unit value parameter interface signal (tx & option ) power for lamp power supply for lcd v lcd 10% 0v 90% 90% 10% t 1 t 2 t 5 t 6 t 7 t 3 t 4 10% 10% valid data lamp on table 10. power sequence 3-6. power sequence 3-6-1. sequence for lcd module www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 16 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 table 11. power sequence for inverter 3-6-3. deep condition for inverter v bl (typ.) x 0.85 0 v v bl : 24v t6 3-6-2. sequence for inverter power supply for inverter note : 1. t1 describes rising time of 0v to 24v and is not applied at restarting time. 2. when the inverter is shut-down by arc protection , t3 need 3.3sec 3. when v bl (24v) is supplied always, there is no reliability p roblem. 4. t4(max) is less than t2. 5. in t7 section, extvbr-b should be duty 100% and vbr-a is recommended 3.3v. v bl (typ) x 0.85 0.85 0.85 0.85 ms 10 - - t6 ms - - 1000 t7 - ms - - 10 t5 4, 5 ms 0 t4 2 1 note ms - - 500 t2 ms - - 200 t3 ms - - 20 t1 max typ min units values parameter extvbr-b : 1. lamp on at pwm rising edge and lamp off at pwm falling edge. 2. extvbr-b has same sequence with vbr-a v on/off vbr-a v bl 10% 0v 90% t 1 t 2 t 3 t 2 0.7v t 4 24v (typ.) t 5 lamp on t 4 t7 1000ms (min) 1000ms (min) www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 17 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 table 12. optical characteristics ta= 25 2 c , v lcd =12.0v, f v =60hz, dclk=72mhz, vbr-a =3.3v, extvbr=100% lcd module optical stage(x,y) pritchard 880 or equivalent 50cm 6 gray scale 5p y axis, down ( =270 ) y axis, up ( =90 ) x axis, left ( =180 ) x axis, right( =0 ) - 89 85 d - 89 85 u - 89 85 l 5 degree - 89 85 r viewing angle (cr>10) white blue green red 0.605 gy 0.280 gx 0.064 by 0.146 bx 0.280 wy 0.276 wx decay time rise time 16 9 - tr d 0.342 ry typ +0.03 0.636 typ -0.03 rx color coordinates [cie1931] 4 ms 16 8 - tr r response time 3 1.3 white luminance variation 2 cd/m 2 410 310 l wh surface luminance, white 1 note unit 600 400 cr contrast ratio max typ min value symbol parameter fig. 1 optical characteristic measurement equipment and method optical characteristics are determined after the un it has been on for 30min in a dark environment at 25 2 c. the values specified are at an approximate distance 50cm from the lcd surface at a viewing angle of and equal to 0 . it is presented additional information concerning the measurement equipment and method in fig. 1. 4. optical specification www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 18 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 89.3 l239 100 l255 40.1 l159 48.9 l175 58.2 l191 68.5 l207 19.3 l111 25.0 l127 32.0 l143 79.1 l223 2.71 l47 5.20 l63 9.06 l79 13.9 l95 1.13 l31 0.34 l15 0.16 l0 luminance [%] (typ) gray level table 13. gray scale specification notes 1. contrast ratio(cr) is defined mathematical ly as : surface luminance with all white pixels contrast ratio = surface luminance with all black pixels it is measured at the center point(1). 2. surface luminance is luminance value at the cent er point across the lcd surface 50cm from the surface with all pixels displaying white. for more information, see fig 2. 3. the variation in surface luminance , white is defined as : white(5p) = maximum(l on1 ,l on2 , l on3 , ...... , l on5 ) / minimum(l on1 ,l on2 , l on3 , ..... , l on5 ) where l on1 to l on5 are the luminance with all pixels displaying white at 5 locations . for more information, see fig 2. 4. response time is the time required for the displ ay to transition from black to white (rise time, tr r ) and from white to black (decay time, tr d ). for additional information, see fig 3. 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determined for the horizontal or x axis and the ver tical or y axis with respect to the z axis which is normal to the lcd surface. for more information , see fig 4. 6. gray scale specification gamma value is approximately 2.2. for more information, see table 13. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 19 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 fig. 3 response time measuring point for surface luminance & measuring point for luminance variation fig. 2 measure point for luminance the response time is defined as the following figur e and shall be measured by switching the input sign al for black to white and white to black. white black t r r t r d 100 90 10 0 optical response black h a v b a : h / 4 mm b : v / 4 mm h : 443.609mm v : 249.408mm @ h,v : active area % www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 20 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 image sticking

when it changes into pattern-b after a 1-hour drive by pattern-a, it disappears within 10 minutes. fig. 4 viewing angle dimension of viewing angle range normal y e = 0 , right = 180 , left = 270 , down = 90 , up www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 21 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 the following items provide general mechanical char acteristics. in addition the figures in the next pa ge are detailed mechanical drawing of the lcd module. 249.408mm vertical hard coating(3h) anti-glare treatment of the front polarizer surface treatment (typ.) 2,800 (g), (max.) 3,000(g) weight 253.8mm vertical 275.0mm vertical 38.0mm depth 443.609mm horizontal active display area 448.0mm horizontal bezel area 472.0mm horizontal outline dimension note : please refer to a mechanic drawing in terms of tolerance at the next page. 5. mechanical characteristics table 14. mechanical characteristics www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 22 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 23 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 24 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 ta= 40 c, 70%rh(240hr) humidity storage test 10 wave form : random vibration level : 1.0g rms bandwidth : 10-500hz duration : x,y,z, 10 min one time each direction vibration test (non-operating) 7 soldering heat cycles test -40 ~ 80 30min/5min/30min 200cycles 6 -20 ~ 60 30min/5min/30min 100cycles heat cycle test 5 condition : 150pf, 330 ohm case, air evaluation : 15kv esd test 9 0 - 14,000 feet(4267.2m) 0 - 40,000 feet(12192m) altitude operating storage / shipment 11 shock level : 100g waveform : half sine wave, 2ms direction : x, y, z one time each direction shock test (non-operating) 8 0 c 500h (1000h) low temperature operation test 4 50 c 80%rh 500h 60 500h (2000h) high temperature operation test 3 -20 c 500h low temperature storage test 2 60 c 500h high temperature storage test 1 condition test item no. 6. reliability table 15. environment test condition note : after reliability test , display function s hould be kept as the result evaluation. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 25 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 7. international standards 7-1. safety a) ul 60065, 7 th edition, dated june 30, 2003, underwriters laborato ries, inc., standard for audio, video and similar electronic ap paratus. b) can/csa c22.2, no. 60065:03, canadian standards association, standard for audio, video and similar electronic ap paratus. c) iec60065:2001, 7 th edition cb-scheme and en 60065:2002, safety requirements for audio, video and similar el ectronic apparatus.. 7-2. emc a) ansi c63.4 methods of measurement of radio-nois e emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. american national standards institute(ansi), 1992 b) cispr22 limits and methods of measurement of ra dio interface characteristics of information technology equipment. international special committ ee on radio interference. c) en 55022 limits and methods of measurement of r adio interface characteristics of information technology equipment. european committee for electr otechnical standardization.(cenelec), 1998 ( including a1: 2000 ) www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 26 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 8-1. designation of lot mark 8-2. packing form 8. packing a) package quantity in one box : 4 pcs b) box size : 530mm x 310mm x 327mm a) lot mark a b c d e f g h i j k l m a,b,c : size(inch) d : year e : month f : factory code g : assembly code h ~ m : serial no. note 1. year 2. month 4. serial no. mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 3 2 1 2003 2002 2001 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 3 2 1 dec mar feb jan 3. factory code c lpl nanjing d heesung mark factory code k lpl gumi b) location of lot mark serial no. is printed on the label. the label is at tached to the backside of the lcd module. this is subject to change without prior notice. mark 100001~199999, 200001~299999, 300001~399999, ., a0 0001~a99999, .., z00001~z99999 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 27 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 please pay attention to the followings when you use this tft lcd module. 9-1. mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applie d to the module. and the case on which a module is mounted s hould have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protectiv e plate to the surface in order to protect the pola rizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials fo r the cover case are not desirable because the form er generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit b reak by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizer s with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothe s with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials l ike chamois soaks with petroleum benzine. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possi ble. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of cir cuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lo wer temperature, it becomes longer.) (3) brightness depends on the temperature. (in lowe r temperature, it becomes lower.) and in lower temperature, response time(required ti me that brightness is stable after turned on) becom es longer. (4) be careful for condensation at sudden temperatu re change. condensation makes damage to polarizer o r electrical contacted parts. and after fading conden sation, smear or spot will occur. (5) when fixed patterns are displayed for a long ti me, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference sha ll be done by system manufacturers. grounding and shieldi ng methods may be important to minimized the interference. (7) please do not give any mechanical and/or acoust ical impact to lcm. otherwise, lcm cant be operate d its full characteristics perfectly. (8) a screw which is fastened up the steels should be a machine screw. (if not, it causes metallic foreign material and de al lcm a fatal blow) (9) please do not set lcd on its edge. 9. precautions www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 28 / 28 lc200wx1 liquid crystal display ver. 1.0 aug.9, 2007 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make c ertain that treatment persons are connected to ground through w rist band etc. and dont touch interface pin direct ly. 9-3. electrostatic discharge control strong light exposure causes degradation of polariz er and color filter. 9-4. precautions for strong light exposure when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the m odule to sunlight or fluorescent light. keep the te mperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contac t with any other object. it is recommended that they be stored in the contai ner in which they were shipped. 9-5. storage 9-6. handling precautions for protection film (1) the protection film is attached to the bezel wi th a small masking tape . when the protection film is peeled off, static elec tricity is generated between the film and polarizer . this should be peeled off slowly and carefully by p eople who are electrically grounded and with well i on- blown equipment or in such a condition, etc. (2) when the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of glue still on the bezel after the p rotection film is peeled off. (3) you can remove the glue easily. when the glue r emains on the bezel surface or its vestige is recog nized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with norma l- hexane. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LC200WX1-SLB3

	To Download LC200WX1-SLB3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .